Need a final assembly from a delivered bundle of joy in the waiting? Got a build problem that needs solutions... hold the judgement? Have a frame or group set that is getting transplated No Problem

Whether you're looking to put someone on their first set of wheels, powered with hands or feet, or getting ready for Elite World Cup races; We're not "Bike-ist"-we build all types of bikes. It's got wheels, you're the engine, and you want to get your go on. We're excited to get you there!  
BikeBuild 1
$90-$200
~1-2 Hours of Build time*
The  20% solution to the 80% bike. Out of a box, and on the roll!
  • On location final build of a bike out of the box
  • Brake & Gear initial lubrication, tuning and initial cable setting*, and "2/20" inspection/tune 
  • Bearing Set Inspection/Install, initial lubrication and/or adjustment
  • Grips/Bar Tape installed
  • On-Bike Drivetrain Initial Clean & Lube
  • Frame & Fork Wipe Down
  • On-Bike Wheel True as required
  • Seat Post prep & Grease or Paste
  • Hardware and Bolts Torqued to Spec
  • Post Build LTE inspection
  • Optamised Tyre Contact Patch Inflation
  • Technician Test Ride
  • Rider initial Fit*
BikeBuild 2
$210-320
Up to 3 Hours of Build time*
Naked frame to full dress. You've picked your frame, group and wheel set. Let's build this!
  • On location build of a bike from naked frame
  • ​Tolerance Inspection and Adjustment of Component Contact & Interface Areas*
  • Derailleur Hanger Alignment Inspection and Adjustment
  • Handle Bar Sizing/Cutting
  • Wheel Stand True & Dish​
  • Off-Bike Drivetrain initial packing grease & Lubrication
  • Brake & Gear initial lubrication, tuning and initial cable setting*, and "2/20" inspection/tune
  • Bearing Set Inspection/Install, initial lubrication and/or adjustment
  • Grips/Bar Tape installed
  • On-Bike Drivetrain Initial Clean & Lube
  • Frame & Fork Wipe Down
  • On-Bike Wheel True as required
  • Seat Post prep & Grease or Paste
  • Hardware and Bolts Torqued to Spec
  • Post Build LTE inspection
  • Optamised Tyre Contact Patch Inflation
  • Technician Test Ride
  • Rider initial Fit*
*Notes
  1. For Longer build times, Tech will determine final cost on location
  2. Builds do not include non-routine a adjustments, new/replacement parts and/or associated installation costs if applicable
  3. Cables will likely require a final set/tune, after a period of riding "break-in". This is included when returning for a "2/20" inspection/tune
  4. "2/20" inspection/tune = inspection and completion of an expected final adjustment of minor issues after initial "break-in"  of approximately 2hour/20km of full range shifting and/or braking.
  5. Bearing Set= Headset, Bottom Bracket, Wheel Hub, Derailleur Pulley/Jockey Wheels, Pedals
  6. Rider initial fit= Saddle height and fore/aft, handlebar height/rotation, cockpit control adjustment
  7. Component Contact & Interface Areas= Frame and rear triangle, head tube, bottom bracket shell, seat tube, steerer tube, bearing set bearing cups/interfaces, front and rear axle drop out/derailleur hanger alignment and spacing
  8. Frame, component and interface tolerances and associated adjustments are subject to the discretion of the Technician. Adjustment may or may not cause damage, or impact safety/worthiness. Therefore, those measurements/tolerances found to be outside of norms may or may not be adjusted.
  9. Bookings are in accordance with our Terms and Conditions